Car Seats, Strollers, & Baby Essentials | Evenflo® Official Site

Shyft Intuiti Travel System Setup Guide

Shyft Intuiti Travel System Setup Guide

By Car Seats, Strollers, & Baby Essentials | Evenflo® Official Site | Published: 2026-10-23

Category: How-to Guides

Learn how to set up your Shyft Intuiti Travel System with Revolve180 LiteMax NXT rotating car seat. Step-by-step instructions for stroller assembly and infant car seat installation.

Quick Answer

Assemble the stroller frame, attach the seat, then install the Revolve180 LiteMax NXT car seat base using the vehicle seat belt or LATCH system before clicking in the carrier.

Before You Start: Check Your Vehicle and Stroller Compatibility

The Revolve180 LiteMax NXT rotating infant car seat fits infants 3-30 lb (15.7-32 in.). Confirm your vehicle has either LATCH anchors or a lap-shoulder belt in the seating position you plan to use. The stroller frame accepts the car seat carrier directly without adapters, but you should verify the stroller wheels lock into place before attaching the seat.

Setup Steps

  1. 1. Unfold and Lock the Stroller Frame: Pull the stroller handle upward until the frame clicks open. Press down on the seat area to confirm the frame is fully locked. Check that both rear wheels are securely snapped into place. Common mistake: Forcing the stroller closed before the frame is fully locked can damage the folding mechanism.
  2. 2. Attach the Stroller Seat or Car Seat Carrier: Align the car seat carrier with the stroller mounting points until you hear a click. For the stroller seat, slide the seat onto the frame rails and push down until it locks. Test by lifting the seat slightly. Common mistake: Not hearing the click means the seat is not secure—always double-check before placing your baby in the seat.
  3. 3. Install the Revolve180 LiteMax NXT Base in Your Vehicle: Place the base on the vehicle seat with the recline foot adjusted to match your seat angle. Thread the seat belt or LATCH strap through the belt path, tighten, and ensure the base does not move more than 1 inch side-to-side. Common checkpoint: The base must be at the correct recline angle (indicator shows green) before tightening. A red indicator means you need to adjust the foot.
  4. 4. Click the Carrier onto the Base and Test Rotation: Lower the carrier onto the base until it clicks. Pull up on the carrier to confirm it is locked. Rotate the carrier 180 degrees using the handle to verify smooth movement and that the rotation lock engages when facing rear or forward. Common mistake: Forgetting to engage the rotation lock before driving can cause the carrier to shift during travel.
  5. 5. Adjust the Stroller Handle and Canopy: Telescope the stroller handle to a comfortable height by pressing the buttons on both sides. Extend the canopy forward to shield your baby from sun or wind. Store the included rain cover in the basket for quick access. Common checkpoint: The handle must lock at your chosen height—if it slips, adjust and re-lock before pushing the stroller.

Product Facts

  • Shyft Intuiti Travel System with Revolve180 LiteMax NXT Rotating Infant Car Seat: The Shyft Intuiti Travel System includes the Revolve180 LiteMax NXT Rotational Infant Car Seat, which rotates 180 degrees for easier in-and-out access. The rotation feature lets you face the baby toward the door when parked, reducing strain on your back during loading and unloading.
    Shyft Intuiti Travel System with Revolve180 LiteMax NXT Rotating Infant Car Seat
    Shyft Intuiti Travel System with Revolve180 LiteMax NXT Rotating Infant Car Seat

Shop Related Products

Shyft Intuiti Travel System with Revolve180 LiteMax NXT Rotating Infant Car Seat

Shyft Intuiti Travel System with Revolve180 LiteMax NXT Rotating Infant Car Seat

$379.49 $549.99

Shop Now