How to Attach the Pivot Xplore Toddler Second Seat Support

Quick answer

Attach the Pivot Xplore second seat support by aligning the seat's mounting brackets with the wagon's designated slots, then press down until you hear a click. Always verify the seat is locked before placing your child in it.

Step-by-step attachment guide

1. Prepare the wagon: Park the Pivot Xplore on a flat surface and engage the brake. Remove any accessories or items that might block the seat mounting area. Always use the brake to prevent the wagon from rolling during installation.
2. Locate the mounting slots: Find the two slots on the wagon frame where the second seat support attaches. They are typically on the inner sides of the wagon, near the front or rear, depending on your model. Check your manual if you can't find the slots; they are not universal.
3. Align the seat support: Hold the seat support so the mounting brackets face the slots. Insert each bracket into its slot at the same time. Do not force it – if it doesn't align, rotate the seat support 180 degrees.
4. Press down until it clicks: Press down firmly on the seat support until you hear a click from both sides. This indicates the brackets are locked. A click on one side only means it's not secure – repeat the press.
5. Test the lock: Gently pull upward on the seat support to ensure it doesn't budge. If it moves, re-insert and press again. Never place your child in the seat until it passes the pull test.

Product facts

• Pivot Xplore Stroller Wagon Toddler Second Stroller Seat Support: This additional seat keeps your little one closer to you at an elevated level while still leaving plenty of room for a second rider below. You can carry two children comfortably without sacrificing storage space in the wagon.